Product Description
Company Info
Product Description
Series of molten salt furnace is a kind of Direct Circulation-style special industrial furnace, use oil and gas as the fuel, molten salt as the carrier, forced liquid circulation by cylcle pump, transfer heat to the users of thermal equipment, then return to re-heating. When the temperature up to 350-480 state, the organic category set can not be used again, need to use molten satlt heat-type set. The entire system composed by the furnace, circulating pump and a melting system.
Advantages:
1) Combustion stability;
2) Provide higher temperature at a lower pressure,;
3) heating temperature stability, can be adjusted accurately and the highest thermal efficiency.
4) Perfect running control and complete securiy detection device. Combustion temperature are automatically adjusted, automatic protection, to ensure safe operation.
5) Closed circulation heating, no heat emission, highly efficient heat utilization.
6) To save energy using of low-cost.
Heater type: Vertical or horizontal, coil-fired or oil fired, will produce according to customers individual real conditions
Rated heat power: 120-14000KW
Pressure designed: 1.0-1.1 Mpa
Heat efficiency: Min68% (non-including waste heat recovery)
Highest working temperature: 450
Circulation molten salt volume: 80-550 m3/h
System installed capacity: 80-400 KW
Combustion type; Coal, oil
Equipment weight: 7000-220, 000kgs
Advantages:
1) Combustion stability;
2) Provide higher temperature at a lower pressure,;
3) heating temperature stability, can be adjusted accurately and the highest thermal efficiency.
4) Perfect running control and complete securiy detection device. Combustion temperature are automatically adjusted, automatic protection, to ensure safe operation.
5) Closed circulation heating, no heat emission, highly efficient heat utilization.
6) To save energy using of low-cost.
Heater type: Vertical or horizontal, coil-fired or oil fired, will produce according to customers individual real conditions
Rated heat power: 120-14000KW
Pressure designed: 1.0-1.1 Mpa
Heat efficiency: Min68% (non-including waste heat recovery)
Highest working temperature: 450
Circulation molten salt volume: 80-550 m3/h
System installed capacity: 80-400 KW
Combustion type; Coal, oil
Equipment weight: 7000-220, 000kgs
Address:
Developing Area of Wuqiao, Cangzhou, Hebei, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Main Products:
Boilers, Thermal Oil Boiler, Thermal Oil Heater, Thermal Fluid Boiler, Thermic Fluid Heater, Waste Heat Boiler
Company Introduction:
Established in 1980, with more than 300 stuff. Company covers an area of 100, 000 square meters, modern standard prodction workshop 40, 000 square meters, with a total lifting capacity of 300 tons, more than 140 engineers and technians.
Specailized in designing and manufacturing various of types of Thermal Oil Boilers, waste heat boilers, molten salt furnace, steam generateor, pressure vessles; Various heat pipe series products, pin tube series of products and boiler auxiliary machines etc. The heating load varies from 100, 000 to 16, 000, 000 kilocalorie per hour.
Specailized in designing and manufacturing various of types of Thermal Oil Boilers, waste heat boilers, molten salt furnace, steam generateor, pressure vessles; Various heat pipe series products, pin tube series of products and boiler auxiliary machines etc. The heating load varies from 100, 000 to 16, 000, 000 kilocalorie per hour.
